| Back to parts |
Honda
Model:
CBR600, F1/ F2/ F3, and the F4/ F4I
XR 500
CBR 600, F1/ F2/ F3, and the F4/ F4I
Camshafts
Hardfaced, exchange
Piston Kits
1mm oversiz 618 stock c:r inc. piston, rings, pin & circlips
2mm oversiz 637 13:1 c:r inc. piston, rings, pin & circlips
Copper head gasket 0.022" thick each
also avilable in .010", .032", .043", .062", .80"
Valve Train
New valve springs, work with stock or titanium tops. per set
Titanium top retainers per set
Nickle aluminum bronze guides
Valve guide seals
R/D valve spring kit with titanium top retainers
Valves
Oversize stainless - available
Valve shims
Connecting Rods
Carrillo rod c-c 3.740
Carrillo rod c-c 3.897
Labor
Port & flow, inc. comp. valve job & assembly - no shimming
Blue print ports, inc. valve job & assembly - no shimming
Competition valve job
Standard valve job
Assemble with valve spring kit
Shim valves
Cam journal repair - per cam
XR 500
Piston
Wiseco 10.5:1 complete with rings, pin & circlips
Wiseco 12:1 complete rings, pin & circlips
EDCO 591 big bore kit inc. piston assembly, cyl. sleeve, head & base
gaskets Wiseco Ring set
Wiseco pin
Camshaft
Hardweld on original cam - exchange
Billet cam- no exchange
Needle bearing version - no exchange available
Hardface rocker arm - each, exchange
Valve Train
R&D kit inc guides, titanium top caps etc.
R&D kit inc guides, chrome moly caps etc.
Nickel aluminum bronze guides
Springs
Titanium top retainers
Chrome moly top retainers
Bottom retainers
Valve guide seals
Valves
Stock intake
Stock exhaust
Oversize intake stainless valves
Valve cotters
Valve seats
Connecting Rod
Carrillo connecting rod
Carrillo rod with bearing & washers
Carrillo rod with bearing, washers & pin
phone: 707.763.7519